Chandelier Lighthouse – a contemporary beacon of light
Chandelier Lighthouse - a contemporary beacon of light The chandelier ‘Lighthouse’ is a reinterpretation of the lighthouse light. The modern Fresnel lenses create a magical, playful light that
Ingemann has joined forces with Ratos company LEDiL
Ingemann has joined forces with Ratos company LEDiL This is a new and exciting beginning for Ingemann Components. This super team LEDiL+Ingemann, creates a new global One-Stop Shopping in
Effective lighting solutions make life brighter for the elderly
Effective lighting solutions make life brighter for the elderly Ingemann Components has been an important partner for Belid Lighting Group in developing a circadian light that improves the
Ingemann Components is going to space with SAGA Space Architects
Ingemann Components is going to space with SAGA Space Architects Ingemann Components, from the small Danish town of Bjæverskov, has assisted SAGA Space Architects in the development of
High UGR performance on new kit solution
The Lumieo Frost and Glacier LED diffusors have been renamed to Ingemann Sky and Ingemann Haze.
Ingemann Components hosted a debate with Danish industry
Ingemann Components hosted a debate with Danish industry In connection with the Danish municipal election, Danish Industry invited the leading candidates on a bus tour.
Pioneering sustainable thinking within optical lighting
Ingemann Components has identified and mapped six areas to minimize its own and the lighting industry’s CO2 footprint, including guidance in designing energy-efficient luminaires, a constant hunt for green materials and an inhouse conversion to green energy.
Ingemann Components enters the American market
Ingemann Components enters the American market The last year, Ingemann has experienced an increasing interest for especially its Light Guide solutions from the USA. To
PRODUCT NEWS: Lumieo Frost and Glacier change names
The Lumieo Frost and Glacier LED diffusors have been renamed to Ingemann Sky and Ingemann Haze.
Successful cooperation leads to excellent results
RIDI Leuchten and Ingeman Components have successfully cooperated on several projects that have resulted in increased 20% energy-efficiency and lower cost.
Technical challenge kicked-off good cooperation
lichtwerk had an issue in meeting the German requirements to workstations with their ciros luminaire, but together with Ingemann they found a solution.
Simple changes led to 30% increase in performance
Frandsen uses Ingemann for quality assuring and optimizing the performance for their luminaires. A few adjustments led to a 30% increase in the luminaire’s performance.
Ingemann doubles its presence in the DACH countries
Ingemann has hired Thorsten Betten as Sales Manager in the DACH countries. Thorsten is a heavyweight within our industry and we are excited about welcoming him.
Design was way ahead of technical solution
Difficulties in finding a partner to connect design and technical solution delayed PROLICHT’s Hadi luminaires, but in cooperation with Ingemann a solution was found in 6 months.
New temilux microprism is on the up
The market demanded a continuous microprism with a new visual appearance for their designs. The temilux®ID Pure microprism met these demands in full.
How to design for later recycling
Get 8 pieces of advice for future-proof design of your luminaire. Retain value of materials and design for later re-/upcycling of your luminaire.
Process optimisation: More precise homogeneity measurements
Videometer’s camera-based system allows us to optimize and enhance our processes for homogeneity measurements, typically used in the LGP development and kitting solutions.
PRESS RELEASE: Lyset skinner i mørket for Bjæverskov-virksomhed
Press release: Ingemann vinder Initiativpris 2020
Proud winner of Initiative Award 2020
Proud winner of Initiative Award 2020 The Confederation of Danish Industry (DI) at Roskilde and Køge Bugt has chosen Ingemann Components as the winner of the Initiative Award 2020.
Focus on energy-efficiency is increasing in Germany
Lately, Søberg Lystek has experienced an increasing interest in energy-efficient solutions from the German market, thus Ingemann's focus on this area is timely.
Design a CO2 friendly optical lighting solution
We've developed a CO2 Calculator that allows you to identify and evaluate the most CO2 friendly optical lighting solution. Watch this presentation of the tool.
Designing a High Performance Luminaire
Based on our more than 25 years of experience within glare control, we have gathered 6 steps that can help you design even more efficient luminaires.
Launch of CO2 Calculator
We've launched a CO2 Calculator that allows you to easily select and identify the most CO2-friendly components.
Sustainability Webinar
On the 24 November 2020, we hosted a webinar where we shared the results of our investigations on how we can contribute to reducing the CO2 emissions related to optical lighting solutions. Watch recording of webinar.
Sustainability
Get Valuable Insights to Our World of Optical Lighting Stay ahead of latest trends within optical lighting, products, services - and get inspiration from other manufacturers.
Increase productivity: Outsource the assembling of optical kits
The advantages of pre-assembled optical kits are numerous. They are quality controlled and delivered in bags ready for use in the manufacturer’s production.
Ingemann hosts its first Sustainability Webinar
At this webinar, we will share our findings in identifying how we can contribute to reducing the CO2 emissions related to optical lighting solutions.
How effective is your luminaire?
Many lighting manufacturers have their own light lab to measure performance during the development process, but if you don’t or want a second opinion, we can help you out.
Presenting the temilux®ID Pure microprism
We are happy to announce the next big thing within microprisms. The temilux®ID Pure microprism is offered both in sheet and continuous film. Here Sales Director, Jens Møller presents the new high-end prism.
Testing: Can you weld an optical prism and a diffusor to one piece?
We made an experiment and tested if it's possible to weld a diffusor and a prisms by ultrasound welding.